MAS-1 4-20 Milliamp Soil Moisture Sensor.

4-20 Milliamp Output, Ultra-Long Cable Lengths.

This sensor offers a standard 4-20 milliamp output that is common with PLCs and irrigation controllers*.  With the 4-20 mA interface, cable lengths over 250 feet are possible.

Research Grade Accuracy

Like our other soil moisture sensors, the MAS-1 measures soil moisture accurately without the sensitivity to electrical conductivity and variation in soil types that have plagued inexpensive sensors in the past.

The MAS-1 delivers research-grade accuracy at a price that makes large sensor networks economically practical. You can adequately characterize your site with sensors at multiple depths and locations, even if you're on a tight budget. And the MAS-1's ultra-long cable lengths give you even more flexibility to put your sensors where you want them.

Reasons to pick the MAS-1

  • If you need a 4-20 milliamp sensor
  • If you need cable lengths greater than 250 feet

Engineered for Accuracy

The MAS-1 determines volumetric water content (VWC) by measuring the dielectric constant of the media using capacitance/frequency domain technology. The sensor uses a 70 MHz frequency,  which minimizes salinity and textural effects, making the MAS-1 accurate in almost any soil or soil-less media. Factory calibrations are included for mineral soils, potting soils and rockwool.

Electrical
Interface Standard 4-20 mA analog transmitter
Supply Voltage 10-32 VDC continuous
Output Current 4 - 20 mA
Overvotage  Protection Yes
Settling Time 4 seconds
Wiring Red Wire: (+) supply
Black Wire: (-) output
Shield: not connected
Measurement
Type Volumetric water content (VWC)
Range 0-100% VWC typical
Resoultion Depends on current measurement (data aquistion) device
Accuracy ±6% VWC with generic calibration for supported growing media up to 65% VWC, above which accuracy lessens.  Increased accuracy can be achieved with a mediumspecific calibration.
Output 4-20 mA current proportional to VWC
Sensor Measurement Interval 1 second
Operating Enivornment Temperature -40 to 80°C
Physical Properties Dimensions 8.9 cm x 1.8 cm x 0.7 cm
Cable 5 m, 2 wire as standard, Custom cable length available upon request
Warranty: One year, parts and labour

We periodically send an email newsletter containing updates, new product releases, training and advice. If you would like to receive these please subscribe below.

Join

Non UK/Ireland Customers

Non UK/Ireland Customers, please contact Decagon Devices at: www.decagon.com

MAS-1 Volume

These innovative sensors will enable you to monitor soil moisture accurately and affordably with a standard 2-wire, 4-20 mA analogue interface for use with many data acquisition and control systems.

*The MAS-1 cannot be used with our standard data loggers.

MAS-1 Manual
Size: 252.4 KB (258,466 bytes)

Environmental Catalogue
Size: 2.5 MB (2,581,813 bytes)

Quotation Request

Email us to request a quotation for the MAS-1 Soil Moisture Sensor.