ECM's Fast Temp thermocouple module outputs ultra-high bandwidth
temperature measurements using standard K-Type (Chromel Alumel),
grounded thermocouple probes. Measurements that once required a
0.005" (0.13mm) diameter exposed-bead thermocouple can now be
performed using a 1/16" (1.5mm) shielded (i.e. more rugged)
thermocouple. The speed increase is made possible by ECM's
proprietary active-drive thermocouple circuitry.
With FastTemp, fast dynamic temperature information hidden by
conventional thermocouple amplifiers now becomes available for use.
FastTemp is especially suited for temperature measurements in the
exhaust of engines for engine control, engine durability,
turbocharger, aftertreatment and exhaust system development.
| Specifications |
| Range: |
-60 to 1370°C (-76 to 2498°F)
|
| Accuracies: |
± 1°C RTI (relative to input)
± 10mV RTO (relative to output)
Internal cold junction compensation
|
| Response Time: |
Fast - Less than 50 msec (10 to 90%)
Standard - Dependant on probe used |
| Outputs: |
5mV/ °C for Fast and Standard signals
Less than 500W output impedance
200V Isolation from sensor input to outputs
2 Female BNC connectors |
| Sensor: |
Supplied: 1/16" (1.5mm) dia., 6" (150mm) grounded K-Type
Optional: Any grounded K-Type
|
Cable:
|
Sensor 2m, Power 2m
|
| Power: |
6 to 35 VDC, 200mW typical
500V galvanic isolation from sensor input and outputs
LED power status indicator |
| Mounting: |
Two 1/5" (5mm) holes from top, Two 10-32 (M5 x 0.8) threaded
holes on back |
| Size & Weight: |
152mm x 70mm x 30mm (6" x 2.75" x 1.2"), 360gm (12.7oz) |
| Environmental: |
IP67, -55 to +125°C, 100% humidity, environmentally sealed |
We periodically send an email
newsletter containing updates, new product releases, training and
advice. If you would like to receive these please subscribe
below.
